2990-00-019-4583 HEATER,COOLANT,ENGINE Index 5905-00-019-4599 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-019-4594

Federal Supply Class:
5905

National Item Identification Number:
000194594

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
09B451403929CARTER MANUFACTURING CORPORATION
1054543719200US ARMY ARDEC RDECOM
6M311404454SENSOR SYSTEMS, L.L.C.
752-623804454SENSOR SYSTEMS, L.L.C.
2129810112GENERAL DYNAMICS MOTION CONTROL LLC
17C3-288419176SERVO INSTRUMENT CORPORATION
FCP223H-3603929CARTER MANUFACTURING CORPORATION


Techincal Specification:
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 ALL SECTIONS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER160.0 ALL SECTIONS
BODY DIAMETER1.100 INCHES MAXIMUM
BODY LENGTH1.960 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 ALL SECTIONS
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50/+0.50 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.20/+1.20 3RD SECTION
PILOT DIAMETER1.0000 INCHES NOMINAL
PILOT LENGTH0.0500 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS6.0 FREE AIR ALL SECTIONS
PROPRIETARY CHARACTERISTICSPACS
MAXIMUM STARTING TORQUE2.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER1.1000 INCHES NOMINAL
MOUNTING METHODCLAMP RING
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 2ND SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0/+20.0 3RD SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0/+20.0 1ST SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY3
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT LENGTH0.500 INCHES NOMINAL
SHAFT STYLEROUND
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION180.0 ALL SECTIONS
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-400.0/+400.0 ALL SECTIONS
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY12 TURRET
UNDERCUT DIAMETER0.973 INCHES NOMINAL
UNDERCUT WIDTH0.0500 INCHES NOMINAL
ELECTRICAL RESISTANCE PER SECTION14.0 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION14.0 KILOHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS 2ND SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us