|
|
|
National Stock Number:
5530-00-274-4078
Federal Supply Class:
5530
National Item Identification Number:
002744078
Description:
PLYWOOD,AIRCRAFT,FLAT PANEL
Detail:
A PANEL COMPOSED OF AN ASSEMBLY OF PLIES OF VENEER JOINED IN A HOT PLATE PRESS WITH A WATER-RESISTANT THERMOSETTING ADHESIVE. EXCEPT FOR SPECIAL CONSTRUCTIONS, THE GRAIN OF ALTERNATE PLIES IS AT RIGHT ANGLES. THE FACE, BACK, AND INNER PLIES MAY BE OF VARIOUS SOFTWOOD OR HARDWOOD SPECIES. THIS PLYWOOD IS USUALLY INTENDED FOR USE IN THE FABRICATION OF STRUCTURAL OR HIGHLY STRESSED AIRCRAFT PARTS.
|
Manufacturer Information:
| MIL-DTL-6070 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-P-6070 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-P-6070B | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MEASURING METHOD AND LENGTH | 48.000 INCHES NOMINAL SPECIFIED OVERALL | | TYPICAL WOOD PRODUCTS USE | FABRICATION OF STRUCTURAL OR HIGHLY STRESSED AIRCRAFT PARTS | | SPECIFICATION/STANDARD DATA | 81349-MIL-P-6070 GOVERNMENT SPECIFICATION | | SUPPLEMENTARY FEATURES | UNIT OF ISSUE,SHEET,NO. OF PLIES,3 | | SURFACE CONDITION DEGREE | ROUGH SANDED TWO SIDES | | THICKNESS-LOCATION AND MEASURING METHOD | 0.115 INCHES MINIMUM OVERALL SPECIFIED AND 0.135 INCHES MAXIMUM OVERALL SPECIFIED |
|
|