|
|
|
National Stock Number:
5365-01-627-6426
Federal Supply Class:
5365
National Item Identification Number:
016276426
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 12538702 | 06085 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 12538702 | 076M6 | AMZ ALABAMA INC. | | 12538702 | 63971 | WATERBURY FARRELL DIV OF TEXTRON INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.75 INCHES NOMINAL | | BOLT HOLE DIAMETER | 0.313 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.50 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.313 INCHES NOMINAL | | LAMINATION QUANTITY | 78 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | UPPER HARD STOP SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN ALL HOLES | | OUTSIDE CORNER RADIUS | 0.13 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.50 INCHES NOMINAL | | OVERALL LENGTH | 2.50 INCHES NOMINAL | | OVERALL THICKNESS | 0.156 INCHES NOMINAL | | OVERALL WIDTH | 1.50 INCHES NOMINAL | | SPECIAL FEATURES | ASBESTOS,RADIOACTIVE,HEXAVALENT CHROMIUM (ELECTROPLATING/COATINGS),CADMIUM (ELECTROPLATING) OR OTHER HIGHLY TOXIC/CARCINOGENIC MATERIALS (DEFINED IN 29 CFR 1910.1200) NOT USED IN THE MFG/ASSEMBLY OF THIS COMPONENT. CLASS I & II OZONE DEPLETING SUBSTANCES SHALL NOT BE USED. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|