|
|
|
National Stock Number:
5365-01-625-2954
Federal Supply Class:
5365
National Item Identification Number:
016252954
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1045730 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | 1045730-003 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| BOLT HOLE DIAMETER | 0.281 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.0 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AST-8221 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.5 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.5 INCHES NOMINAL | | OVERALL LENGTH | 6.0 INCHES NOMINAL | | OVERALL THICKNESS | 0.5 INCHES NOMINAL | | OVERALL WIDTH | 1.0 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE MOUNT SPACER | | SPECIAL FEATURES | FINIS: CLEA, PRE-TREAT, PRIME AND PAINT IAW MIL-DTL-53072 (CARC), A. CLEAN IAW MIL-DTL-53072, B. PRE-TREAT WITH CHROMATE CONVERSION COATING IAW MIL-DTL-53022, CLASS 1A, C. COAT WITH EPOXY PRIMER IAW MIL-PRF-23377, CLASS N OR MIL-DTL-53022 TYPE IV, D. PAINT IAW MIL-DTL-53039 OR MIL-DTL-64159, COLOR PER CONTRACT IAW FED-STD-595 | | STYLE DESIGNATOR | RECTANGULAR |
|
|