|
|
|
National Stock Number:
5365-01-625-2108
Federal Supply Class:
5365
National Item Identification Number:
016252108
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| GS11E0008C08AE5 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| END CUT ANGLE | 0.156 RADIANS | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | OVERALL LENGTH | 0.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.050 INCHES NOMINAL | | OVERALL WIDTH | 0.500 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | STRIP RADIUS REINFORCEMENT | | SPECIFICATION/STANDARD DATA | 26512-GS11E MANUFACTURERS STANDARD | | STYLE DESIGNATOR | SQUARE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 1A ALODINE 1200 COATING WITH EXPOXY PRIMER IAW MIL-P-23377TY MIL SPEC SINGLE TREATMENT RESPONSE OR EPOXY PRIMER PER GSS4310 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER | | TEMP RATING | 121.0 CELSIUS |
|
|