|
|
|
National Stock Number:
5365-01-623-8269
Federal Supply Class:
5365
National Item Identification Number:
016238269
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 13041513-1 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| OVERALL LENGTH | 5.720 INCHES MINIMUM AND 5.780 INCHES MAXIMUM | | OVERALL THICKNESS | 0.063 INCHES NOMINAL | | OVERALL WIDTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 5052 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,HOLD DOWN | | SPECIAL FEATURES | ITEM HAS 2 SLOTS ALONG LENGTH OPEN TO EDGE. EACH ARE 0.500 FROM EDGE ON EACH END ALONG LENGTH. CLOSED END IS 0.378 +/- 0.004 DIAMETER.HOLE CENTER BEGINS 1.375 FROM EDGE ALONG WIDTH. |
|
|