|
|
|
National Stock Number:
5365-01-618-2082
Federal Supply Class:
5365
National Item Identification Number:
016182082
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3256941-502 | 93346 | CAES SYSTEMS LLC |
|
Techincal Specification:
| OVERALL THICKNESS | 0.645 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | SPECIAL FEATURES | HAS SLOT NEAR RIGHT SHORT SIDE WITH 2 HOLES, BOTH 0.390 IN. DIA AND ON CENTER LENGTHWISE LINE: ONE 2.402 FROM LEFT EDGE IS 0.390 IN. DEEP; OTHER IS 3.915 IN. FROM LEFT EDGE AND IS DRILLED THROUGH; NUMEROUS OTHER HOLES FOR HELICAL COIL INSERTS - SEE DRAWING FOR DETAILS | | STYLE DESIGNATOR | RECTANGULAR | | MATERIAL DOCUMENT AND CLASSIFICATION | CRS5301 (CAGE 67110) GLASS REINFORCED POLYETHERIMIDE THERMOPLASTIC MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | GLASS OR PLASTIC | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BLOCK,PIN RETAINER | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 5.230 INCHES NOMINAL |
|
|