|
|
|
National Stock Number:
5365-01-618-0860
Federal Supply Class:
5365
National Item Identification Number:
016180860
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| L3400054-007 | 072E5 | VERTEX MODERNIZATION AND SUSTAINMENT LLC | | L3400054-007 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 2.160 INCHES NOMINAL | | HOLE DIAMETER | 0.203 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,WHEEL DOOR SWITCH-NOSE LANDING GEAR | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/12 7075-T6 FED SPEC 1ST MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | NONDEFINITIVE SPEC/STD DATA | 2 MOUNTING | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.100 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 2.300 INCHES NOMINAL | | OVERALL THICKNESS | 0.016 INCHES NOMINAL | | OVERALL WIDTH | 0.620 INCHES NOMINAL | | SPECIAL FEATURES | BEVEL CORNERS ON OUSTIDE PERIPHERY;DETAILS SEE DRAWING L3400054-007 | | SLOT QUANTITY | 1 | | STYLE DESIGNATOR | NON-CIRCULAR W/BEVELED CORNERS |
|
|