|
|
|
National Stock Number:
5365-01-616-7380
Federal Supply Class:
5365
National Item Identification Number:
016167380
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 65640-003 | 6N039 | HENDRICKSON USA LLC | | 65640-3 | 6N039 | HENDRICKSON USA LLC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 1 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 9.5 MILLIMETERS NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM FOR TORQUE ROD | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 177.95 MILLIMETERS NOMINAL | | OVERALL THICKNESS | 0.114 MILLIMETERS MINIMUM AND 0.126 MILLIMETERS MAXIMUM | | OVERALL WIDTH | 88.2 MILLIMETERS NOMINAL | | SLOT LENGTH | 20.5 MILLIMETERS MINIMUM | | SLOT QUANTITY | 2 | | SLOT WIDTH | 18.0 MILLIMETERS MINIMUM | | SPECIAL FEATURES | SHIM IS BENT AT A 40 DEGREE ANGLE PLUS/MINUS 1 DEGREE, 43.8MM FROM BOTTOM; INSIDE CUT-OUT IS 102.75MM WIDE BY A MINIMUM OF 56MM DEEP | | STYLE DESIGNATOR | RECTANGULAR |
|
|