|
|
|
National Stock Number:
5365-01-616-4094
Federal Supply Class:
5365
National Item Identification Number:
016164094
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3642517 | 45152 | OSHKOSH CORP | | 3642517 | 75Q65 | OSHKOSH DEFENSE LLC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 5 | | HOLE DIAMETER | 0.936 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE, SPACER, REAR, SPNSN | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.750 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 3.100 INCHES NOMINAL | | OVERALL LENGTH | 18.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.375 INCHES NOMINAL | | OVERALL WIDTH | 1.880 INCHES NOMINAL | | SPECIAL FEATURES | MRC ADVE DIMENSION IS FOR RIGHT END BOLT HOLE;LEFT END BOLT HOLE DISTANCE FROM CENTER TO END IS 2.410 IN (NOM);DISTANCE BETWEEN 1ST AND 2ND HOLE ALONG LENGTH IS 1.98 IN (NOM);DISTANCE BETWEEN 2ND AND 3RD HOLE ALONG LENGTH IS 6.77 IN (NOM);DISTANCE BETWEEN 3RD AND 4TH HOLE ALONG LENGTH IS 2.81 IN (NOM);DISTANCE BETWEEN 4TH AND 5TH HOLE ALONG LENGTH IS 3.43 IN (NOM) | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|