|
|
|
National Stock Number:
5365-01-614-5507
Federal Supply Class:
5365
National Item Identification Number:
016145507
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 010-5282-000 | 1UMJ7 | LOCKHEED MARTIN GYROCAM SYSTEMS LLC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE,SPACER, DOVETAIL MAST | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 4.25 INCHES NOMINAL | | OVERALL THICKNESS | 0.990 INCHES NOMINAL | | OVERALL WIDTH | 3.38 INCHES NOMINAL | | SPECIAL FEATURES | ITEM HAS EIGHT HOLES, NONE ARE DRILLED THRU, AND 4 ARE ON EACH SIDE. ALL ARE TAPPED 0.25-28 UNF-2A. THE FIRST ARE LOCATED AT 0.375 AND 3.875 ALONG THE LENGTH AND 0.438 AND 2.942 ALONG THE WIDTH. THE SECOND SIDE HOLES ARE LOCATED 2 AT 1.688 ALONG THE WIDTH AND 1.00 AND 3.00 ALOMG THE LENGTH. THE SECOND TWO ON THIS SIDE ARE AT 2.125 ALONG THE LENGTH AND0.565 AND 2.125 ALONG THE WIDTH. | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PER MIL-A-8625, TYPE II, CLASS 2 MIL STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|