|
|
|
National Stock Number:
5365-01-612-5843
Federal Supply Class:
5365
National Item Identification Number:
016125843
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 449-075-512-127 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.390 INCHES MINIMUM AND 0.420 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 2024 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.40 INCHES NOMINAL | | OVERALL THICKNESS | 0.190 INCHES NOMINAL | | OVERALL WIDTH | 0.92 INCHES NOMINAL | | SPECIAL FEATURES | PLATE IS BASICALLY RETANGULAR EXCEPT ON END WIDTH IS SHORTER THAN THE OTHER. THE CUT AWAY HAS A RADIUS OF O.O6 STARTING FROM 0.40 ABBOVE THE BOTTOM EDGE TO 0.52 ALONG THE RIGHT SIDE. THE UPPER RIGHT CORNER HAS A 0.38 RADIUS. THERE IS A ROUND APERTURE LOCATED 1.025 FROM THE BOTTOM EDGE AND 0.425 IN FROM THE LEFT EDGE. THE TOP END IS 0.80 WIDE. | | STYLE DESIGNATOR | RECTANGULAR |
|
|