|
|
|
National Stock Number:
5365-01-612-4688
Federal Supply Class:
5365
National Item Identification Number:
016124688
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 13015120 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| APERTURE DIAMETER | 1.00 INCHES NOMINAL | | BOLT HOLE QUANTITY | 7 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.50 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.50 INCHES NOMINAL | | HOLE DIAMETER | 0.313 INCHES MINIMUM AND 0.343 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.25 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.50 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.50 INCHES NOMINAL | | OVERALL LENGTH | 6.50 INCHES NOMINAL | | OVERALL THICKNESS | 0.050 INCHES NOMINAL | | OVERALL WIDTH | 3.50 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | THE APERTURE IS LOCATED 2.88 INCH FROM THE TOP AND 1.75 INCH FROM THE WIDTH. THE LOCATION OF THE 3 BOLT HOLES NOTE POSITIONED ABOVE ARE ONE AT 1.75 ALONG WIDTH AND .88 ABOVE CENTER OF THE APERTURE. THE OTHER TWO ARE LOCATED 1.37 INCH BELOW THE APERTURE AND 1.06 FROM EACH EDGE ALONG THE LENGTH. ALL THREE HOLES ARE 0.282 MIN AND 0.312 MAX DIAMETER. | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|