|
|
|
National Stock Number:
5365-01-610-5069
Federal Supply Class:
5365
National Item Identification Number:
016105069
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 4012-100-007722 | 1SC69 | XPER, INC. | | 6052375 | 34623 | AM GENERAL LLC | | VEE00016 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | VEE00016-025 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | M-130-25 | 458W5 | STANDARD BENT GLASS LLC |
|
Techincal Specification:
| HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | STAINLESS STEEL 301-316 PER ASTM A666 OR ASTM A240,CONDITION OPTIONAL,UNS S30100-S31600 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INSIDE SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.50 INCHES NOMINAL | | OVERALL THICKNESS | 0.025 INCHES NOMINAL | | OVERALL WIDTH | 1.00 INCHES NOMINAL | | SPECIAL FEATURES | OPTIONAL MATERIAL LISTED:SHIM STOCK,LAMINATED PER MIL-DTL-22499/3 TY II,CL 2;SPACER HAS ONE FOOT 0.875IN FROM RIGHT CORNER WHERE THE HOLE IS LOCATED;RIGHT CORNER IS AT A 45DEG ANGLE;SEE DRAWING FOR ADDITIONAL INFORMATION | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OR AMS 2700 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|