|
|
|
National Stock Number:
5365-01-605-3736
Federal Supply Class:
5365
National Item Identification Number:
016053736
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 775-46286-5 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 10 | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.1920 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.0095 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | BMS8-79, CLASS 4, STYLE 7781, GRADE A MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | GLASS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NOZZLE, BOTTOM DIFFUSER PLATE | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 39.8000 INCHES NOMINAL | | OVERALL THICKNESS | 0.0950 INCHES NOMINAL | | OVERALL WIDTH | 3.1930 INCHES NOMINAL | | SPECIAL FEATURES | COLOR IS PER FED-STD-595 NUMBER 37886. MATERIAL IS GLASS FABRIC REINFORCED EPOXY LAMINATE. MOUNTING HOLES ARE COUNTERSUNK TO 0.3350-0.3450 INCHES AT 99-101 DEGREES. | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAC5325 MFR REF 1ST TREATMENT RESPONSE AND BAC5755, TYPE 4 MFR REF 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND PAINT |
|
|