|
|
|
National Stock Number:
5365-01-598-2801
Federal Supply Class:
5365
National Item Identification Number:
015982801
Description:
SPACER,PLATE
Detail:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| L15092 | 0ADD7 | BAE SYSTEMS ADVANCED TECHNOLOGIES INC | | L15092 | 19397 | BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC. |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-53022, TYPE II MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-DTL-5039, TYPE II, COLOR TAN MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER AND PAINT | | BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.813 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.852 INCHES NOMINAL | | HOLE DIAMETER | 2.600 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36A/36M ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.315 INCHES NOMINAL | | OVERALL LENGTH | 3.850 INCHES NOMINAL | | OVERALL THICKNESS | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | BOTH HOLES COUNTERSUNK 90 DEGREES .530 IN. DIA. ON BOTH SIDES OF SPACER PLATE;ONE SIDE ALONG THE LENGTH HAS A SEMICIRCLE NOTCH 1.10 IN. WIDE WITH A .560 IN. RADIUS (CENTERED 1.050 IN FROM EDGE) AND A 40 DEGREE ANGLED END STARING AT 3.100 INCHES FROM THE EDGE | | OVERALL WIDTH | 0.750 INCHES NOMINAL |
|
|