5365-01-594-7422, SPACER,PLATE

National Stock Number:
5365-01-594-7422

Federal Supply Class:
5365

National Item Identification Number:
015947422

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

1529553	15980	KDI CORP
1529553	66126	L3HARRIS FUZING AND ORDNANCE SYSTEMS, INC.

Techincal Specification:

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
BOLT HOLE DIAMETER	0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
BOLT HOLE QUANTITY	1
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.000 INCHES NOMINAL
HOLE DIAMETER	0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
OVERALL LENGTH	1.496 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
OVERALL THICKNESS	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
OVERALL WIDTH	0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	OD 8853 MFR REF SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
PART NAME ASSIGNED BY CONTROLLING AGENCY	SPACER
STYLE DESIGNATOR	NON-CIRCULAR W/SQUARE CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-16232A,TY I MIL STD SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PHOSPHATE MANGANESE

Click here to Register for Free 30-day Trial