|
|
|
National Stock Number:
5365-01-581-1918
Federal Supply Class:
5365
National Item Identification Number:
015811918
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12503149 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| OVERALL LENGTH | 1.750 INCHES NOMINAL | | OVERALL THICKNESS | 0.135 INCHES NOMINAL | | OVERALL WIDTH | 0.813 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1008, CS TYPE B ASSN STD 1ST MATERIAL RESPONSE OR ASTM A1011, CS TYPE B ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1011 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | SPECIAL FEATURES | COLOR IS TAN; ONE HOLE WITH NOMINAL DIAMETER OF 0.450 INCHES; HOLE CENTERPONT LOCATED 0.540 INCHES FROM EDGE ALONG WIDTH AND 1.300 INCHES FROM EDGE ALONG LENGTH; ONE CORNER NEAREST HOLE ROUNDED TO NOMINAL RADIUS OF 0.380 INCHES | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT | PAINT |
|
|