|
|
|
National Stock Number:
5365-01-570-7982
Federal Supply Class:
5365
National Item Identification Number:
015707982
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3392AS982 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.425 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.050 INCHES NOMINAL | | HOLE DIAMETER | 0.410 INCHES NOMINAL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FORWARD BRACKET SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.310 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 2.950 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | SPECIAL FEATURES | CENTER HOLE IS COUNTERSUNK,BLACK OXIDE COATING | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SURFACE TREATMENT | OXIDE |
|
|