|
|
|
National Stock Number:
5365-01-521-6461
Federal Supply Class:
5365
National Item Identification Number:
015216461
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 7379270 ITEM NO. 5 | 57311 | NIPAK INC | | 7379286-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 65 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-DTL-22499, COMP 3, TY 1, CL 1, ALLOY 302 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, DOOR, AFT, LAMINATED | | OVERALL LENGTH | 8.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.130 INCHES NOMINAL | | OVERALL WIDTH | 3.450 INCHES NOMINAL | | SPECIAL FEATURES | HAS 5 BOLT HOLES, 0.562 INCH IN DIAMETER CENTERED ON 2 LINES 0.125 INCH AND 2.50 INCHES FROM LEFT/LONG EDGE; HOLES IN LEFT LINE ARE 0.75, 3.25 AND 6.50 INCHES FROM TOP EDGE; HOLES ON RIGHT ARE 1.63 AND 4.88 INCHES FROM RIGHT EDGE | | STYLE DESIGNATOR | RECTANGULAR |
|
|