5365-01-519-2721, SPACER,PLATE

National Stock Number:
5365-01-519-2721

Federal Supply Class:
5365

National Item Identification Number:
015192721

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

816-3639-002

13499

ROCKWELL COLLINS, INC.

Techincal Specification:

APERTURE LENGTH	2.120 INCHES MINIMUM AND 2.160 INCHES MAXIMUM
APERTURE WIDTH	0.180 INCHES MINIMUM AND 0.720 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.492 INCHES MINIMUM AND 1.508 INCHES MAXIMUM
HOLE DIAMETER	0.097 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-I-24768/2, TYPE GEE; NATURAL COLOR. MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	PLASTIC
PART NAME ASSIGNED BY CONTROLLING AGENCY	SPACER, CONNECTOR (36 PIN)
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.090 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
OVERALL LENGTH	2.380 INCHES MINIMUM AND 2.420 INCHES MAXIMUM
OVERALL THICKNESS	0.063 INCHES NOMINAL
OVERALL WIDTH	0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES

Click here to Register for Free 30-day Trial