|
|
|
National Stock Number:
5365-01-485-4755
Federal Supply Class:
5365
National Item Identification Number:
014854755
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 72A097615-2001 | 76301 | THE BOEING COMPANY | | 72A097615-2001 | R3753 | MT HOEJGAARD A/S: USE R4897 | | 72A097615-2001 | R4897 | PROMECON A/S |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 8 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 13.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 10.000 INCHES NOMINAL | | FSC APPLICATION DATA | NHA PN 72A097615-1001 | | LARGEST BOLT HOLE QUANTITY | 0 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER-ISOLATOR AFT FOOT | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 1.000 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 1.000 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 2.000 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 2.000 INCHES NOMINAL | | OVERALL LENGTH | 14.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.062 INCHES NOMINAL | | OVERALL WIDTH | 17.000 INCHES NOMINAL | | SMALLEST BOLT HOLE QUANTITY | 8 | | SPECIAL FEATURES | MATERIAL EPOXY FIBERGLASS LAMINATE, M24768/2-S-7; 4 HOLES ALONG LENGTH,DISTANC EDGE TO 1ST HOLE 2.000, 1ST HOLE TO 2ND HOLE3.500, 1ST HOLE TO 3RD HOLE 9.500, 1ST HOLE TO 4TH HOLE 13.000 INCH | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|