5365-01-453-6531, SPACER,PLATE

5925-01-453-6530 CIRCUIT BREAKER SUBASSEMBLY

5925-01-453-6532 CIRCUIT BREAKER SUBASSEMBLY

National Stock Number:
5365-01-453-6531

Federal Supply Class:
5365

National Item Identification Number:
014536531

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

1007600P-3

80249

BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.

Techincal Specification:

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HOLE DIAMETER	0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER RADIUS	0.090 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.124 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.124 INCHES NOMINAL
OVERALL LENGTH	1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM
OVERALL THICKNESS	0.087 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
OVERALL WIDTH	1.050 INCHES MINIMUM AND 1.070 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CL3 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE
APERTURE DIAMETER	0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM

Click here to Register for Free 30-day Trial