5365-01-446-9427, SPACER,PLATE

National Stock Number:
5365-01-446-9427

Federal Supply Class:
5365

National Item Identification Number:
014469427

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

17N8D0836-13

88277

THE BOEING COMPANY

Techincal Specification:

SPECIAL FEATURES	MATERIAL SHEET, CRES A-286 SOLN HEAT TREADED STOCK SIZE .125X2X5
STYLE DESIGNATOR	NON-CIRCULAR W/BEVELED CORNERS
BOLT HOLE QUANTITY	2
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM
HOLE DIAMETER	0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	IRON ALLOY 660
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.130 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	1.250 INCHES MINIMUM AND 1.310 INCHES MAXIMUM
OVERALL LENGTH	4.030 INCHES MINIMUM AND 4.090 INCHES MAXIMUM
OVERALL THICKNESS	0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
OVERALL WIDTH	1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM

Click here to Register for Free 30-day Trial