|
|
|
National Stock Number:
5365-01-444-3864
Federal Supply Class:
5365
National Item Identification Number:
014443864
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| DAA3121F926-010 | 80378 | TRIUMPH AEROSTRUCTURES, LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.420 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-24768/3 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC EPOXY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM,SOLID-DOOR/PANEL, LWR ACCESS | | OUTSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | OVERALL THICKNESS | 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM | | OVERALL WIDTH | 1.150 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES | | SPECIAL FEATURES | THE RADIUS GIVEN IS FOR TWO CORNERS ONLY;WHAT WOULD BE THE OTHER CORNERS FOR THE STYLE, IS ACTUALLY A FULL RADIUS |
|
|