|
|
|
National Stock Number:
5365-01-441-0286
Federal Supply Class:
5365
National Item Identification Number:
014410286
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1589717P01 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.305 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.329 INCHES MINIMUM AND 1.408 INCHES MAXIMUM | | HOLE DIAMETER | 0.365 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.835 INCHES NOMINAL | | OVERALL LENGTH | 4.564 INCHES NOMINAL | | OVERALL THICKNESS | 0.032 INCHES MINIMUM AND 0.036 INCHES MAXIMUM | | OVERALL WIDTH | 0.635 INCHES NOMINAL | | SPECIAL FEATURES | SPACER IS SLIGHTLY BENT ALONG LENGTH; ONE SIDE ALONG LENGTH IS CHAMFERED; CHAMFER HAS MINIMUM LENGTH OF 0.020 IN. AND MAXIMUM LENGTH OF 0.030 IN.; CHAMFER HAS NOMINAL ANGLE OF 45.0 DEGREES | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|