|
|
|
National Stock Number:
5365-01-440-0121
Federal Supply Class:
5365
National Item Identification Number:
014400121
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 7574630-011 | 13160 | GENERAL DYNAMICS LAND SYSTEMS INC. |
|
Techincal Specification:
| APERTURE LENGTH | 12.500 INCHES NOMINAL | | APERTURE WIDTH | 5.510 INCHES NOMINAL | | BOLT HOLE QUANTITY | 7 | | HOLE DIAMETER | 0.600 INCHES NOMINAL | | INSIDE CORNER RADIUS | 0.375 INCHES NOMINAL | | MATERIAL | STEEL COMP 1144 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 14.350 INCHES NOMINAL | | OVERALL THICKNESS | 0.400 INCHES NOMINAL | | OVERALL WIDTH | 7.260 INCHES NOMINAL | | SPECIAL FEATURES | 1 HOLE 0.3746 IN. DIA; 1 HOLE 0.2511 IN. DIA; 1 HOLE 0.312 IN. DIA; 1 HOLE 0.359 IN. DIA; 1 SLOT 0.297 IN. WIDE AND 0.400 IN. LONG; 1 SLOT 0.251 IN. WIDE AND 0.380 IN. LONG; ITEM INCLUDES 1 PIN, STRAIGHT HEADLESS, NSN 5315-01-437-0035 | | SURFACE TREATMENT | PAINT |
|
|