|
|
|
National Stock Number:
5365-01-437-3625
Federal Supply Class:
5365
National Item Identification Number:
014373625
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A331014-2083 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.410 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | OVERALL LENGTH | 2.950 INCHES NOMINAL | | OVERALL THICKNESS | 0.080 INCHES NOMINAL | | OVERALL WIDTH | 0.820 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5517 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | SPECIAL FEATURES | BOLT HOLES ARE NOT EQUALLY SPACED; TWO BOLT HOLES HAVE MINIMUM DIAMETER OF 0.1635 IN. AND MAXIMUM DIAMETER OF 0.1660 IN.; TWO OTHER BOLT HOLES HAVE MINIMUM DIAMETER OF 0.1895 IN. AND MAXIMUM DIAMETER OF 0.1920 IN. | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|