|
|
|
National Stock Number:
5365-01-437-0527
Federal Supply Class:
5365
National Item Identification Number:
014370527
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5300-1 | 00624 | EATON AEROQUIP LLC | | 5300-1 | 08118 | EATON AVIATION CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 2.431 INCHES MINIMUM AND 2.451 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.053 INCHES MINIMUM AND 3.073 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.312 INCHES MINIMUM AND 0.319 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A564 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 630 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 3.573 INCHES MINIMUM AND 3.593 INCHES MAXIMUM | | OVERALL THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | SPECIAL FEATURES | PASSIVATE TYPE 2 OR 8 | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|