5365-01-436-3599, SHIM

National Stock Number:
5365-01-436-3599

Federal Supply Class:
5365

National Item Identification Number:
014363599

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

5124958

82577

RAYTHEON COMPANY

Techincal Specification:

APERTURE WIDTH	0.198 INCHES MINIMUM AND 0.202 INCHES MAXIMUM
APERTURE LENGTH	0.898 INCHES MINIMUM AND 0.902 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.215 INCHES MINIMUM AND 1.235 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
CONSTRUCTION	ONE-PIECE
HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
INSIDE CORNER RADIUS	0.015 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.319 INCHES MINIMUM AND 0.321 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.159 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.148 INCHES MINIMUM AND 0.168 INCHES MAXIMUM
OVERALL LENGTH	1.510 INCHES MINIMUM AND 1.570 INCHES MAXIMUM
OVERALL THICKNESS	0.005 INCHES NOMINAL
OVERALL WIDTH	0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/1, TEMP H14 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 1100
SPECIAL FEATURES	OUTSIDE CORNERS ARE CHAMFERED 0.100 IN. X 45.0 DEG; ORIGINAL NAME-SPACER,PLATE
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial