5365-01-436-3588, SHIM

National Stock Number:
5365-01-436-3588

Federal Supply Class:
5365

National Item Identification Number:
014363588

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Manufacturer Information:

3263989-20

82577

RAYTHEON COMPANY

Techincal Specification:

APERTURE LENGTH	0.898 INCHES MINIMUM AND 0.902 INCHES MAXIMUM
APERTURE WIDTH	0.398 INCHES MINIMUM AND 0.402 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM
CONSTRUCTION	ONE-PIECE
HOLE DIAMETER	0.146 INCHES MINIMUM AND 0.152 INCHES MAXIMUM
INSIDE CORNER RADIUS	0.015 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/1,TEMP H14 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 1100
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.449 INCHES MINIMUM AND 0.451 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.237 INCHES MINIMUM AND 0.239 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.179 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
OVERALL LENGTH	1.790 INCHES MINIMUM AND 1.810 INCHES MAXIMUM
OVERALL THICKNESS	0.005 INCHES NOMINAL
OVERALL WIDTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
SPECIAL FEATURES	MASK ALL MATING SURFACES AND HOLES; EPOXY PRIME COAT ONLY OUTSIDE EDGES OF SHIM PER RPR17003 TYPE I OR II; ORIGINAL NAME-SPACER,PLATE; OUTSIDE CORNERS ARE CHAMFERED 0.100 IN. X 45.0 DEG
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial