|
|
|
National Stock Number:
5365-01-435-8523
Federal Supply Class:
5365
National Item Identification Number:
014358523
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 17P3A2415-511 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.745 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | OUTSIDE CORNER RADIUS | 0.130 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.920 INCHES NOMINAL | | OVERALL LENGTH | 5.840 INCHES NOMINAL | | OVERALL THICKNESS | 0.010 INCHES NOMINAL | | OVERALL WIDTH | 1.490 INCHES NOMINAL | | SPECIAL FEATURES | ONE OUTSIDE CORNER HAS NOMINAL RADIUS OF 0.630 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND BOLT HOLES IS 1.800 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD BOLT HOLES IS 2.200 IN. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SURFACE TREATMENT | CHROMATE AND ANODIZE AND PLASTIC EPOXY AND PLASTIC POLYAMIDE OR PLASTIC POLYURETHANE |
|
|