|
|
|
National Stock Number:
5365-01-435-8520
Federal Supply Class:
5365
National Item Identification Number:
014358520
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 17P3A2415-509 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.745 INCHES NOMINAL | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | OUTSIDE CORNER RADIUS | 0.130 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.920 INCHES NOMINAL | | OVERALL LENGTH | 5.840 INCHES NOMINAL | | OVERALL THICKNESS | 0.020 INCHES NOMINAL | | OVERALL WIDTH | 1.490 INCHES NOMINAL | | SPECIAL FEATURES | ONE OUTSIDE CORNER HAS NOMINAL RADIUS OF 0.630 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND BOLT HOLES IS 1.800 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD BOLT HOLES IS 2.200 IN. | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SURFACE TREATMENT | CHROMATE AND ANODIZE AND PLASTIC EPOXY AND PLASTIC POLYAMIDE OR PLASTIC POLYURETHANE |
|
|