|
|
|
National Stock Number:
5365-01-424-6609
Federal Supply Class:
5365
National Item Identification Number:
014246609
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 17N6W0609-9 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/13, T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | OVERALL LENGTH | 0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | OVERALL THICKNESS | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | OVERALL WIDTH | 0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | SPECIAL FEATURES | HOLE IS OFF CENTERED, ITS .50 FROM RIGHT SIDE AND .51 FROM BOTTOM. SPACER CAN'T EXCEED MORE THAN 3 AND UP TO .250 THICKNESS. | | STYLE DESIGNATOR | NON-CIRCULAR W/O BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE |
|
|