5365-01-424-6601, SPACER,PLATE

National Stock Number:
5365-01-424-6601

Federal Supply Class:
5365

National Item Identification Number:
014246601

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

17N6W0609-19

88277

THE BOEING COMPANY

Techincal Specification:

BOLT HOLE QUANTITY	2
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.180 INCHES MINIMUM AND 1.240 INCHES MAXIMUM
HOLE DIAMETER	0.190 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/13, T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY
PART NAME ASSIGNED BY CONTROLLING AGENCY	SHIM
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER RADIUS	0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.390 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
OVERALL LENGTH	2.140 INCHES MINIMUM AND 2.200 INCHES MAXIMUM
OVERALL THICKNESS	0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
OVERALL WIDTH	1.230 INCHES MINIMUM AND 1.290 INCHES MAXIMUM
SPECIAL FEATURES	MAX 3 SHIM STACKED UP, NOT TO EXCEED .250 THICKNESS. HOLES ARE .42 INCH IN AND .48 INCH IN FROM BOTH SIDES WITH .19 RADIUS CONNECTED.
STYLE DESIGNATOR	NON-CIRCULAR W/CORNER RADIUS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	ANODIZE AND PRIMER

Click here to Register for Free 30-day Trial