|
|
|
National Stock Number:
5365-01-420-8676
Federal Supply Class:
5365
National Item Identification Number:
014208676
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12366257 | 06085 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 12366257 | 076M6 | AMZ ALABAMA INC. | | 12366257 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.375 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.500 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.570 INCHES MINIMUM AND 0.610 INCHES MAXIMUM | | LARGEST BOLT HOLE QUANTITY | 2 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD ALL MATERIAL RESPONSES OR ASTM A108 ASSN STD ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM | | OVERALL THICKNESS | 0.917 INCHES MINIMUM AND 0.957 INCHES MAXIMUM | | OVERALL WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | SMALLEST BOLT HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 1 | | SPECIAL FEATURES | ONE END OF PLATE IS ROUNDED WITH A RADIUS OF 0.380, OTHER END IS CHAMFERED TO A LENGTH OF 0.060 |
|
|