|
|
|
National Stock Number:
5365-01-411-3811
Federal Supply Class:
5365
National Item Identification Number:
014113811
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 862502-1 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 862502-1 | 17863 | LITTON SYSTEMS INC GUIDANCE AND CONTROL SYSTEMS DIV |
|
Techincal Specification:
| APERTURE LENGTH | 2.090 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.151 INCHES NOMINAL | | LARGEST BOLT HOLE QUANTITY | 4 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OVERALL LENGTH | 2.340 INCHES NOMINAL | | OVERALL THICKNESS | 0.340 INCHES NOMINAL | | OVERALL WIDTH | 1.930 INCHES NOMINAL | | SMALLEST BOLT HOLE DIAMETER | 0.095 INCHES NOMINAL | | SMALLEST BOLT HOLE QUANTITY | 4 | | SPECIAL FEATURES | 4 RAISED SLOTS ON EACH SIDE, 0.440 INS WIDE, 0.080 DEEP; 2 DOWEL PINS DRILLED IN ONE SIDE OF PLATE, CRES MATERIAL, 0.093 INS DIA X 0.310 INS LG | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5541, CL 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|