|
|
|
National Stock Number:
5365-01-409-0131
Federal Supply Class:
5365
National Item Identification Number:
014090131
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 211066361 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 585-6406618-25 | 53711 | NAVAL SEA SYSTEMS COMMAND | | DF2081-239 FIND 25 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 16 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.500 INCHES NOMINAL | | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316L | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 0.500 INCHES NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.120 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.679 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.990 INCHES NOMINAL | | OVERALL LENGTH | 41.970 INCHES MINIMUM AND 41.990 INCHES MAXIMUM | | OVERALL THICKNESS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL WIDTH | 2.859 INCHES MINIMUM AND 2.869 INCHES MAXIMUM | | SPECIAL FEATURES | BOTH ENDS ALONG WIDTH TAPERED TO A NOMINAL THICKNESS OF 0.120 IN.; THERE IS ONE BOLT HOLE IN THE MIDDLE OF EACH END OF LENGTH WITH SEVEN EQUALLY SPACED ROWS OF TWO BOLT HOLES BETWEEN THEM ALONG THE LENGTH. | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|