5365-01-408-8544, SPACER,PLATE

National Stock Number:
5365-01-408-8544

Federal Supply Class:
5365

National Item Identification Number:
014088544

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

685687-3	20418	DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING
685687-3	98255	DRS SUSTAINMENT SYSTEMS INC

Techincal Specification:

APERTURE LENGTH	0.6195 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM
APERTURE WIDTH	0.3085 INCHES MINIMUM AND 0.3135 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	0.994 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.956 INCHES NOMINAL
HOLE DIAMETER	0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/8,T6 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 6061
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.125 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.125 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.1595 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.1785 INCHES NOMINAL
OVERALL LENGTH	1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
OVERALL THICKNESS	1.000 INCHES NOMINAL
OVERALL WIDTH	1.298 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377,CL 1 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-C-83286 MIL SPEC 3RD TREATMENT RESPONSE AND MIL-C-5541,CL 3 MIL SPEC 4TH TREATMENT RESPONSE
SURFACE TREATMENT	PLASTIC EPOXY AND PLASTIC POLYAMIDE AND PLASTIC POLYURETHANE AND CHROMATE

Click here to Register for Free 30-day Trial