|
|
|
National Stock Number:
5365-01-408-1982
Federal Supply Class:
5365
National Item Identification Number:
014081982
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 270903-7 | 94987 | CUBIC DEFENSE APPLICATIONS, INC. |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OVERALL LENGTH | 10.120 INCHES NOMINAL | | OVERALL THICKNESS | 0.090 INCHES NOMINAL | | OVERALL WIDTH | 0.560 INCHES NOMINAL | | SPECIAL FEATURES | COLOR OF PLATE IS YELLOW; SPACER HAS FOUR NOTCHES; ALL NOTCHES ARE ON SAME SIDE OF LENGTH; THERE IS ONE NOTCH ON EACH END AND TWO IN THE MIDDLE; EACH NOTCH HAS NOMINAL LENGTH OF 0.440 INCHES AND NOMINAL WIDTH OF 0.310 INCHES. | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|