|
|
|
National Stock Number:
5365-01-406-2109
Federal Supply Class:
5365
National Item Identification Number:
014062109
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 12412166 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6359 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL WIDTH | 7.000 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 | | OVERALL LENGTH | 9.120 INCHES NOMINAL | | OVERALL THICKNESS | 0.200 INCHES MINIMUM AND 0.223 INCHES MAXIMUM | | SPECIAL FEATURES | UPPER LEFT CORNER BEVEL 2.000 IN. BY 3.460 IN.; 3 REMAINING CORNERS BEVELED 0.250 IN. BY 45 DEGS; ONE SLOT OFF CENTER 1.030 IN. LONG BY 0.546 IN. WIDE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PAINT |
|
|