|
|
|
National Stock Number:
5365-01-406-1234
Federal Supply Class:
5365
National Item Identification Number:
014061234
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 064973 | 34228 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.572 INCHES MINIMUM AND 0.582 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 40 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.172 INCHES NOMINAL | | OVERALL THICKNESS | 0.080 INCHES NOMINAL | | OVERALL WIDTH | 0.300 INCHES NOMINAL | | SPECIAL FEATURES | FOUR BOLT HOLES HAVE MINIMUM DIAMETER OF 0.145 INCHES AND MAXIMUM DIAMETER OF 0.150 INCHES; TWO BOLT HOLES HAVE MINIMUM DIAMETER OF 0.172 INCHES AND MAXIMUM DIAMETER OF 0.182 INCHES; NOMINAL WIDTH EXPANDS IN BOTH DIRECTIONS ABOUT MIDWAY ALONG LENGTH OF SHIM. |
|
|