|
|
|
National Stock Number:
5365-01-400-3282
Federal Supply Class:
5365
National Item Identification Number:
014003282
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2498-00-313-13 SZ-5 STY-A TY-I | 16626 | CIRCOR INTL INC | | 2498-00-313-13 SZ-5 STY-A TY-I | 35795 | LESLIE CONTROLS, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 4.737 INCHES MINIMUM AND 4.752 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 6.219 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.280 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A351 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316 OR STEEL UNS J92900 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 6.915 INCHES MINIMUM AND 6.920 INCHES MAXIMUM | | OVERALL THICKNESS | 0.328 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
|
|