|
|
|
National Stock Number:
5365-01-399-4684
Federal Supply Class:
5365
National Item Identification Number:
013994684
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2943291-101 | 3H889 | PARKER-HANNIFIN CORPORATION | | 2943291-101 | 59211 | PARKER-HANNIFIN CORPORATION | | 2943291-101 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| BOLT CIRCLE DIAMETER | 4.480 INCHES NOMINAL | | BOLT HOLE QUANTITY | 12 | | HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.250 INCHES NOMINAL | | OVERALL THICKNESS | 0.193 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | OVERALL WIDTH | 5.200 INCHES NOMINAL | | SIDE RADIUS FROM GASKET CENTER | 2.325 INCHES NOMINAL | | SPECIAL FEATURES | HAS TWO ADDITIONAL BOLT HOLES WITH MINIMUM DIAMETER OF 0.124 INCHES AND MAXIMUM DIAMETER OF 0.129 INCHES; THERE IS A SLIGHT IRREGULARITY IN SPACING BETWEEN SOME BOLT HOLES | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT | ANODIZE |
|
|