|
|
|
National Stock Number:
5365-01-399-0447
Federal Supply Class:
5365
National Item Identification Number:
013990447
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1710122 | 05869 | RAYTHEON COMPANY | | 4201360-42 | 05869 | RAYTHEON COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 1.125 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.875 INCHES NOMINAL | | OVERALL LENGTH | 5.190 INCHES MINIMUM AND 5.310 INCHES MAXIMUM | | OVERALL THICKNESS | 0.190 INCHES NOMINAL | | OVERALL WIDTH | 2.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.680 INCHES NOMINAL | | SPECIAL FEATURES | BOLT HOLES ARE SLOTS RATHER THAN ROUND; BOLT HOLES HAVE MINIMUM WIDTH OF 0.281 INCHES AND MAXIMUM WIDTH OF 0.291 INCHES; BOLT HOLES HAVE NOMINAL LENGTH OF 0.625 INCHES; THICKNESS BECOMES SMALLER 1.120 NOMINAL INCHES FROM EDGE OF LENGTH; NOMINAL THICKNESS BECOMES 0.105 INCHES IN THIS AREA | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|