|
|
|
National Stock Number:
5365-01-397-8157
Federal Supply Class:
5365
National Item Identification Number:
013978157
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 2745162-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.169 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 1 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.066 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 1.405 INCHES MINIMUM AND 1.445 INCHES MAXIMUM | | OVERALL THICKNESS | 0.004 INCHES MINIMUM AND 0.006 INCHES MAXIMUM | | OVERALL WIDTH | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM | | SPECIAL FEATURES | HAS TWO SQUARE OUTSIDE CORNERS AND TWO BEVELED OUTSIDE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TY VI FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-35, TY VII FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|