|
|
|
National Stock Number:
5365-01-393-4224
Federal Supply Class:
5365
National Item Identification Number:
013934224
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| DAA3383D093-013 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.140 INCHES NOMINAL | | BOLT HOLE QUANTITY | 5 | | HOLE DIAMETER | 0.136 INCHES MINIMUM AND 0.147 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | OUTSIDE CORNER RADIUS | 0.015 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.140 INCHES NOMINAL | | OVERALL LENGTH | 7.130 INCHES NOMINAL | | OVERALL WIDTH | 0.280 INCHES NOMINAL | | SPECIAL FEATURES | NOMINAL CENTER TO CENTER DISTANCE BETWEEN FIRST TWO BOLT HOLES ON BOTH ENDS ALONG LENGTH IS 1.675 INCHES; NOMINAL CENTER TO CENTER DISTANCE BETWEEN CENTER BOLT HOLE AND NEXT BOLT HOLE ON EITHER SIDE IS 1.750 INCHES | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS |
|
|