5365-01-389-7679, SPACER,PLATE

National Stock Number:
5365-01-389-7679

Federal Supply Class:
5365

National Item Identification Number:
013897679

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

12420351-002	076M6	AMZ ALABAMA INC.
12420351-002	0FW39	BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP
12420351-002	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Techincal Specification:

BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	82.500 MILLIMETERS NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	81.500 MILLIMETERS NOMINAL
HOLE DIAMETER	12.000 MILLIMETERS NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	11.000 MILLIMETERS NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	16.300 MILLIMETERS NOMINAL
OVERALL LENGTH	115.000 MILLIMETERS NOMINAL
OVERALL THICKNESS	0.250 INCHES NOMINAL
OVERALL WIDTH	105.000 MILLIMETERS NOMINAL
SPECIAL FEATURES	PLATE HAS AN OBLONG SHAPED APERTURE, 30 MM WIDE, 80 MM LONG; COLOR IS GREEN
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PLASTIC POLYURETHANE

Click here to Register for Free 30-day Trial