|
|
|
National Stock Number:
5365-01-386-0460
Federal Supply Class:
5365
National Item Identification Number:
013860460
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| SW34358 | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | SW34358 | 98255 | DRS SUSTAINMENT SYSTEMS INC |
|
Techincal Specification:
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.250 INCHES MINIMUM AND 1.370 INCHES MAXIMUM | | OVERALL LENGTH | 9.560 INCHES MINIMUM AND 9.680 INCHES MAXIMUM | | OVERALL THICKNESS | 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | OVERALL WIDTH | 2.190 INCHES MINIMUM AND 2.310 INCHES MAXIMUM | | SPECIAL FEATURES | 0.375-16 UNC-2B THREADED MOUNTING HOLES | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT | PAINT | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 6.940 INCHES MINIMUM AND 7.060 INCHES MAXIMUM | | HOLE DIAMETER | 0.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS |
|
|