|
|
|
National Stock Number:
5365-01-377-2682
Federal Supply Class:
5365
National Item Identification Number:
013772682
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 74241003A | 04901 | BOONTON ELECTRONICS CORPORATION | | T-101-200 | 32559 | BIVAR INC |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | HOLE DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | OVERALL LENGTH | 0.190 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL THICKNESS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | OVERALL WIDTH | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | SPECIAL FEATURES | 15 PIECES PER ITEM; CROSS SLOTTED THROUGH TOP FACE,CENTERED BETWEEN FOUR MOUNTING HOLES, 0.030 IN. WD BY 0.130 IN LONG | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|